Performance of 3000 Watt PLTS at the Dompet Dhuafa Palembang Free Health Service Clinic Against Load Variations
DOI:
https://doi.org/10.59247/ijase.v1i1.61Keywords:
PLTS, Inverters, Work Method, Inductive Load, Resistive LoadAbstract
Since the system has been operational until now, the PLTS at the LKC wallet dhuafa Palembang clinic has never been analyzed on the system's performance, so it is not yet known whether this system is working well or not. The aim of this research is to analyze the performance of PLTS at the LKC Dompet Dhuafa Palembang clinic against variations in inductive and resistive loads. This research has 4 research stages, namely: 1). Literature study. 2). tool testing is carried out. 3). Data collection measurements. 4). Data analysis. From this research, the results obtained from testing tools and measuring data on PLTS performance at the LKC wallet dhuafa Palembang clinic with variations in inductive and resistive loads, when measuring the highest inductive input power was 449.8 W, the resulting efficiency was 83% at 12 :00, while the resistive input power is 546 W, the resulting efficiency is 80% from 12:00 to 15:00. From the research that has been carried out, the inductive load efficiency calculation results are 83% at 12:00 and the resistive load efficiency calculation results are 80% from 12:00 to 15:00. So it can be concluded that the performance of PLTS at the LKC Dhompet Dhuafa Palembang clinic is optimal in terms of load calculations.
References
Y. Meng, R. Zhou, H. Dinçer, S. Yüksel, and C. Wang, “Analysis of inventive problem-solving capacities for renewable energy storage investments,” Energy Reports, vol. 7, pp. 4779–4791, Nov. 2021, https://doi.org/10.1016/j.egyr.2021.06.086.
S. Y. Sarpong, M. A. Bein, B. A. Gyamfi, and S. A. Sarkodie, “The impact of tourism arrivals, tourism receipts and renewable energy consumption on quality of life: A panel study of Southern African region,” Heliyon, vol. 6, no. 11, p. e05351, Nov. 2020, https://doi.org/10.1016/j.heliyon.2020.e05351.
M. N. Uddin, M. A. Rahman, M. Mofijur, J. Taweekun, K. Techato, and M. G. Rasul, “Renewable energy in Bangladesh: Status and prospects,” Energy Procedia, vol. 160, pp. 655–661, Feb. 2019, https://doi.org/10.1016/j.egypro.2019.02.218.
S. Fraser, B. J. Williamson, V. Nikora, and B. E. Scott, “Fish distributions in a tidal channel indicate the behavioural impact of a marine renewable energy installation,” Energy Reports, vol. 4, pp. 65–69, Nov. 2018, https://doi.org/10.1016/j.egyr.2018.01.008.
J. C. Stephens, D. J. Kopin, E. J. Wilson, and T. R. Peterson, “Framing of customer engagement opportunities and renewable energy integration by electric utility representatives,” Util. Policy, vol. 47, pp. 69–74, Aug. 2017, https://doi.org/10.1016/j.jup.2017.05.005.
R. Radmehr, S. R. Henneberry, and S. Shayanmehr, “Renewable Energy Consumption, CO2 Emissions, and Economic Growth Nexus: A Simultaneity Spatial Modeling Analysis of EU Countries,” Struct. Chang. Econ. Dyn., vol. 57, pp. 13–27, Jun. 2021, https://doi.org/10.1016/j.strueco.2021.01.006.
O. J. Ayamolowo, P. T. Manditereza, and K. Kusakana, “Exploring the gaps in renewable energy integration to grid,” Energy Reports, vol. 6, pp. 992–999, Dec. 2020, https://doi.org/10.1016/j.egyr.2020.11.086.
R. Iacobucci, B. McLellan, and T. Tezuka, “Costs and carbon emissions of shared autonomous electric vehicles in a Virtual Power Plant and Microgrid with renewable energy,” Energy Procedia, vol. 156, pp. 401–405, Jan. 2019, https://doi.org/10.1016/j.egypro.2018.11.104.
A. Avdis, A. S. Candy, J. Hill, S. C. Kramer, and M. D. Piggott, “Efficient unstructured mesh generation for marine renewable energy applications,” Renew. Energy, vol. 116, pp. 842–856, Feb. 2018, https://doi.org/10.1016/j.renene.2017.09.058.
E. C. X. Ikejemba, P. C. Schuur, J. Van Hillegersberg, and P. B. Mpuan, “Failures & generic recommendations towards the sustainable management of renewable energy projects in Sub-Saharan Africa (Part 2 of 2),” Renew. Energy, vol. 113, pp. 639–647, Dec. 2017, https://doi.org/10.1016/j.renene.2017.06.002.
F. Boulaire, J. Love, and I. Mackinnon, “An adaptive renewable energy plant (AREP) - To power local premises and vehicles with 100% renewables,” Energy Strateg. Rev., vol. 38, p. 100703, Nov. 2021, https://doi.org/10.1016/j.esr.2021.100703.
S. Susan and D. Wardhani, “Building integrated photovoltaic as GREENSHIP’S on site renewable energy tool,” Results Eng., vol. 7, p. 100153, Sep. 2020, https://doi.org/10.1016/j.rineng.2020.100153.
L. R. Camargo, J. Valdes, Y. M. Macia, and W. Dorner, “Assessment of on-site steady electricity generation from renewable energy sources in Chile,” Energy Procedia, vol. 158, pp. 1099–1104, Feb. 2019, https://doi.org/10.1016/j.egypro.2019.01.266.
A. M. Ibrahim and R. A. Swief, “Comparison of modern heuristic algorithms for loss reduction in power distribution network equipped with renewable energy resources,” Ain Shams Eng. J., vol. 9, no. 4, pp. 3347–3358, Dec. 2018, https://doi.org/10.1016/j.asej.2017.11.003.
C. Chaichana, W. Wongsapai, D. Damrongsak, K. N. Ishihara, and N. Luangchosiri, “Promoting Community Renewable Energy as a tool for Sustainable Development in Rural Areas of Thailand,” Energy Procedia, vol. 141, pp. 114–118, Dec. 2017, https://doi.org/10.1016/j.egypro.2017.11.022.
D. Tang et al., “Allocation strategy of regulated consumption quota ratio of renewable energy based on game theory,” Energy Reports, vol. 7, pp. 67-74, 2021, https://doi.org/10.1016/j.egyr.2021.05.074.
D. Hulshof and M. Mulder, “The impact of renewable energy use on firm profit,” Energy Econ., vol. 92, p. 104957, Oct. 2020, https://doi.org/10.1016/j.eneco.2020.104957.
C. M. Goodess et al., “Advancing climate services for the European renewable energy sector through capacity building and user engagement,” Clim. Serv., vol. 16, p. 100139, Dec. 2019, https://doi.org/10.1016/j.cliser.2019.100139.
J. Yan et al., “Renewable Energy Integration with Mini/Microgrid,” Energy Procedia, vol. 145, pp. 1–2, Jul. 2018, https://doi.org/10.1016/j.egypro.2018.04.001.
R. Akermi, S. T. Hachana, and A. Triki, “Conceptualizing civil society attitudes towards the promotion of renewable energy: A case study from Tunisia,” Energy Procedia, vol. 141, pp. 131–137, Dec. 2017, https://doi.org/10.1016/j.egypro.2017.11.025.
C. Ammari, D. Belatrache, B. Touhami, and S. Makhloufi, “Sizing, optimization, control and energy management of hybrid renewable energy system—A review,” Energy Built Environ., vol. 3, no. 4, pp. 399-411, 2021, https://doi.org/10.1016/j.enbenv.2021.04.002.
L. Sanderink and N. Nasiritousi, “How institutional interactions can strengthen effectiveness: The case of multi-stakeholder partnerships for renewable energy,” Energy Policy, vol. 141, p. 111447, Jun. 2020, https://doi.org/10.1016/j.enpol.2020.111447.
A. Hidayatno, A. R. Destyanto, and B. A. Handoyo, “A Conceptualization of Renewable Energy-Powered Industrial Cluster Development in Indonesia,” Energy Procedia, vol. 156, pp. 7–12, Jan. 2019, https://doi.org/10.1016/j.egypro.2018.11.074.
N. Zhang, Y. Lu, and J. Chen, “Development of An Innovation Diffusion Model for Renewable Energy Deployment,” Energy Procedia, vol. 152, pp. 959–964, Oct. 2018, https://doi.org/10.1016/j.egypro.2018.09.100.
V. S, G. G P, and K. Singhania, “Role of Renewable Energy in Indian Power Sector,” Energy Procedia, vol. 138, pp. 1073–1078, Oct. 2017, https://doi.org/10.1016/j.egypro.2017.10.117.
L. Peng, F. Liu, M. Zhou, M. Li, Q. Zhang, and D. L. Mauzerall, “Alternative-energy-vehicles deployment delivers climate, air quality, and health co-benefits when coupled with decarbonizing power generation in China,” One Earth, vol. 4, no. 8, pp. 1127–1140, Aug. 2021, https://doi.org/10.1016/j.oneear.2021.07.007.
J. Kim, D. Jeong, D. Choi, and E. Park, “Exploring public perceptions of renewable energy: Evidence from a word network model in social network services,” Energy Strateg. Rev., vol. 32, p. 100552, Nov. 2020, https://doi.org/10.1016/j.esr.2020.100552.
D. D’Agostino, D. Parker, and P. Melià, “Environmental and economic implications of energy efficiency in new residential buildings: A multi-criteria selection approach,” Energy Strateg. Rev., vol. 26, p. 100412, Nov. 2019, https://doi.org/10.1016/j.esr.2019.100412.
K. O’Brien, “Is the 1.5°C target possible? Exploring the three spheres of transformation,” Curr. Opin. Environ. Sustain., vol. 31, pp. 153–160, Apr. 2018, https://doi.org/10.1016/j.cosust.2018.04.010.
K. Likit-anurak, K. Uthaichana, K. Punyawudho, and Y. Khunatorn, “The Performance and Efficiency of Organic Electrolyte Redox Flow Battery Prototype,” Energy Procedia, vol. 118, pp. 54–62, Aug. 2017, https://doi.org/10.1016/j.egypro.2017.07.012.
S. Gururatana, R. Prapainop, S. Chuepeng, and S. Skullong, “Development of heat transfer performance in tubular heat exchanger with improved NACA0024 vortex generator,” Case Stud. Therm. Eng., vol. 26, p. 101166, Aug. 2021, https://doi.org/10.1016/j.csite.2021.101166.
K. Kuroki et al., “Ostial dimensional changes after pulmonary vein isolation: Pulsed field ablation vs radiofrequency ablation,” Hear. Rhythm, vol. 17, no. 9, pp. 1528–1535, Sep. 2020, https://doi.org/10.1016/j.hrthm.2020.04.040.
G. Garcia-Garcia and S. Rahimifard, “Life-cycle environmental impacts of barley straw valorisation,” Resour. Conserv. Recycl., vol. 149, pp. 1–11, Oct. 2019, https://doi.org/10.1016/j.resconrec.2019.05.026.
J.-X. Feng, Y.-X. Tong, and G.-R. Li, “Epitaxial Growth Modulation of Hollow Topologies for High-Performance Electrocatalysts,” Chem., vol. 4, no. 9, pp. 2015–2017, Sep. 2018, https://doi.org/10.1016/j.chempr.2018.08.021.
C. Pacchiega and P. Fausti, “A study on the energy performance of a ground source heat pump utilized in the refurbishment of an historical building: comparison of different design options,” Energy Procedia, vol. 133, pp. 349–357, Oct. 2017, https://doi.org/10.1016/j.egypro.2017.09.360.
P. Chunark, T. Hanaoka, and B. Limmeechokchai, “Shared socioeconomic pathways and long-term GHG mitigation towards 2050 in Thailand cement industry,” Clean. Responsible Consum., vol. 2, p. 100006, Jun. 2021, https://doi.org/10.1016/j.clrc.2020.100006.
R. M. Mohamed, G. A. Kadry, H. A. Abdel-Samad, and M. E. Awad, “High operative heterogeneous catalyst in biodiesel production from waste cooking oil,” Egypt. J. Pet., vol. 29, no. 1, pp. 59–65, Mar. 2020, https://doi.org/10.1016/j.ejpe.2019.11.002.
A. Paulillo, A. Striolo, and P. Lettieri, “Data on the environmental impacts of the Hellisheiði geothermal plant and on the carbon intensity of geothermal energy and other energy technologies,” Data Br., vol. 27, p. 104771, Dec. 2019, https://doi.org/10.1016/j.dib.2019.104771.
Z. Wang, D. Luo, and L. Liu, “Natural gas utilization in China: Development trends and prospects,” Energy Reports, vol. 4, pp. 351–356, Nov. 2018, https://doi.org/10.1016/j.egyr.2018.05.005.
E. Ma, P. Chen, H. M. Wilkins, T. Wang, R. H. Swerdlow, and Q. Chen, “Pharmacologic ascorbate induces neuroblastoma cell death by hydrogen peroxide mediated DNA damage and reduction in cancer cell glycolysis,” Free Radic. Biol. Med., vol. 113, pp. 36–47, Dec. 2017, https://doi.org/10.1016/j.freeradbiomed.2017.09.008.
N. Kassem, C. R. Galatino, J. W. Tester, C. L. Anderson, and M. C. Moore, “Moving Toward a Framework for Electricity and Heat Equivalence in Energy Systems Analysis,” iScience, p. 103123, Sep. 2021, https://doi.org/10.1016/j.isci.2021.103123.
D. Saebea, S. Authayanun, and Y. Patcharavorachot, “Performance analysis of direct steam reforming of methane in SOFC with SDC-based electrolyte,” Energy Reports, vol. 6, pp. 391–396, Feb. 2020, https://doi.org/10.1016/j.egyr.2019.08.078.
R. Wei et al., “Evolution of effective thermal conductivity during hydrate formation and decomposition in natural sediments,” Energy Procedia, vol. 158, pp. 5825–5831, Feb. 2019, https://doi.org/10.1016/j.egypro.2019.01.545.
E. Stunzenas and I. Kliopova, “Optimizing municipal biodegradable waste management system to increase biogas output and nutrient recovery: a case study in Lithuania,” Energy Procedia, vol. 147, pp. 641–648, Aug. 2018, https://doi.org/10.1016/j.egypro.2018.07.083.
D. Watson, Y. Binnie, K. Duncan, and J.-F. Dorville, “Photurgen: The open source software for the analysis and design of hybrid solar wind energy systems in the Caribbean region: A brief introduction to its development policy,” Energy Reports, vol. 3, pp. 61–69, Nov. 2017, https://doi.org/10.1016/j.egyr.2017.03.001.
C. Sarasa and K. Turner, “Can a combination of efficiency initiatives give us ‘good’ rebound effects?,” Energy, vol. 235, p. 121335, Nov. 2021, https://doi.org/10.1016/j.energy.2021.121335.
M. A. Rodrigues de Brito, D. Baidya, and S. A. Ghoreishi-Madiseh, “Techno-economic feasibility assessment of a diesel exhaust heat recovery system to preheat mine intake air in remote cold climate regions,” Int. J. Min. Sci. Technol., vol. 30, no. 4, pp. 517–523, Jul. 2020, https://doi.org/10.1016/j.ijmst.2020.05.014.
N. Ralbag et al., “Composite Materials with Combined Electronic and Ionic Properties,” Matter, vol. 1, no. 4, pp. 959–975, Oct. 2019, https://doi.org/10.1016/j.matt.2019.04.007.
A. Shaabani and S. E. Hooshmand, “Diversity-oriented catalyst-free synthesis of pseudopeptides containing rhodanine scaffolds via a one-pot sequential isocyanide-based six-component reactions in water using ultrasound irradiation,” Ultrason. Sonochem., vol. 40, pp. 84–90, Jan. 2018, https://doi.org/10.1016/j.ultsonch.2017.06.030.
H. A. Kazem, M. H. Albadi, A. H. A. Al-Waeli, A. H. Al-Busaidi, and M. T. Chaichan, “Techno-economic feasibility analysis of 1 MW photovoltaic grid connected system in Oman,” Case Stud. Therm. Eng., vol. 10, pp. 131–141, Sep. 2017, https://doi.org/10.1016/j.csite.2017.05.008.
B. Maes, M. Buyle, A. Audenaert, and B. Craeye, “Enhanced fly ash use in concrete: Ex-ante LCA on an emerging electro-mass separation technology,” Clean. Eng. Technol., vol. 2, p. 100076, Jun. 2021, https://doi.org/10.1016/j.clet.2021.100076.
A. Kumar and S.-Y. Pan, “Opportunities and challenges of electrochemical water treatment integrated with renewable energy at the water-energy nexus,” Water-Energy Nexus, vol. 3, pp. 110–116, 2020, https://doi.org/10.1016/j.wen.2020.03.006.
A. Elamim, B. Hartiti, A. Haibaoui, A. Lfakir, and P. Thevenin, “Comparative study of photovoltaic solar systems connected to the grid: Performance evaluation and economic analysis,” Energy Procedia, vol. 159, pp. 333–339, Feb. 2019, https://doi.org/10.1016/j.egypro.2019.01.006.
K. P. Furlan et al., “Photonic materials for high-temperature applications: Synthesis and characterization by X-ray ptychographic tomography,” Appl. Mater. Today, vol. 13, pp. 359–369, Dec. 2018, https://doi.org/10.1016/j.apmt.2018.10.002.
T. Huld, “PVMAPS: Software tools and data for the estimation of solar radiation and photovoltaic module performance over large geographical areas,” Sol. Energy, vol. 142, pp. 171–181, Jan. 2017, https://doi.org/10.1016/j.solener.2016.12.014.
P. Baard, “Knowledge, participation, and the future: Epistemic quality in energy scenario construction,” Energy Res. Soc. Sci., vol. 75, p. 102019, May 2021, https://doi.org/10.1016/j.erss.2021.102019.
F. Z. Kessaissia, A. Zegaoui, M. Aillerie, M. Arab, M. Boutoubat, and C. Fares, “Factorial design and response surface optimization for modeling photovoltaic module parameters,” Energy Reports, vol. 6, pp. 299–309, Feb. 2020, https://doi.org/10.1016/j.egyr.2019.11.016.
R. J. Thorne, E. A. Bouman, C. B. B. Guerreiro, A. Majchrzak, and S. Calus, “Using life cycle assessment to inform municipal climate mitigation planning,” Energy Policy, vol. 129, pp. 173–181, Jun. 2019, https://doi.org/10.1016/j.enpol.2019.02.002.
A. Rubenis and L. R. Adrian, “Determining energy storage amount for development of novel microgrid energy flow optimization system with photovoltaic energy generation,” Energy Procedia, vol. 147, pp. 428–437, Aug. 2018, https://doi.org/10.1016/j.egypro.2018.07.113.
M. Raugei et al., “Energy Return on Energy Invested (ERoEI) for photovoltaic solar systems in regions of moderate insolation: A comprehensive response,” Energy Policy, vol. 102, pp. 377–384, Mar. 2017, https://doi.org/10.1016/j.enpol.2016.12.042.
F. Roussafi, “Regional development trajectories of renewable energy: Evidence from French regions,” Energy Strateg. Rev., vol. 35, p. 100639, May 2021, https://doi.org/10.1016/j.esr.2021.100639.
T. Som, M. Dwivedi, C. Dubey, and A. Sharma, “Parametric Studies on Artificial Intelligence Techniques for Battery SOC Management and Optimization of Renewable Power,” Procedia Comput. Sci., vol. 167, no. 2019, pp. 353–362, 2020, https://doi.org/10.1016/j.procs.2020.03.235.
V. Reis, R. H. Almeida, J. A. Silva, and M. C. Brito, “Demand aggregation for photovoltaic self-consumption,” Energy Reports, vol. 5, pp. 54–61, Nov. 2019, https://doi.org/10.1016/j.egyr.2018.11.002.
F. Feldmann et al., “Charge carrier transport mechanisms of passivating contacts studied by temperature-dependent J-V measurements,” Sol. Energy Mater. Sol. Cells, vol. 178, pp. 15–19, May 2018, https://doi.org/10.1016/j.solmat.2018.01.008.
D. Lincot, “The new paradigm of photovoltaics: From powering satellites to powering humanity,” Comptes Rendus Phys., vol. 18, no. 7–8, pp. 381–390, Sep. 2017, https://doi.org/10.1016/j.crhy.2017.09.003.
J. Ramirez-Vergara, L. B. Bosman, W. D. Leon-Salas, and E. Wollega, “Ambient temperature and solar irradiance forecasting prediction horizon sensitivity analysis,” Mach. Learn. with Appl., vol. 6, p. 100128, Dec. 2021, https://doi.org/10.1016/j.mlwa.2021.100128.
A. Algieri, P. Morrone, D. Perrone, S. Bova, and T. Castiglione, “Analysis of multi-source energy system for small-scale domestic applications. Integration of biodiesel, solar and wind energy,” Energy Reports, vol. 6, pp. 652–659, Feb. 2020, https://doi.org/10.1016/j.egyr.2019.09.045.
Z. Zhu, Z. Zhu, P. Xu, and D. Xue, “Exploring the impact of government subsidy and R&D investment on financial competitiveness of China’s new energy listed companies: An empirical study,” Energy Reports, vol. 5, pp. 919–925, Nov. 2019, https://doi.org/10.1016/j.egyr.2019.07.013.
A. Gligor, C.-D. Dumitru, and H.-S. Grif, “Artificial intelligence solution for managing a photovoltaic energy production unit,” Procedia Manuf., vol. 22, pp. 626–633, 2018, https://doi.org/10.1016/j.promfg.2018.03.091.
Y. Zhou, X. Liu, and G. Zhang, “Performance of buildings integrated with a photovoltaic–thermal collector and phase change materials,” Procedia Eng., vol. 205, pp. 1337–1343, 2017, https://doi.org/10.1016/j.proeng.2017.10.109.
J. Bilbao-Ubillos and V. Camino-Beldarrain, “Reconfiguring global value chains in a post-Brexit world: A technological interpretation,” Technol. Soc., vol. 67, p. 101716, Nov. 2021, https://doi.org/10.1016/j.techsoc.2021.101716.
Z. Khounani et al., “Data on environmental analysis of natural antioxidant production from walnut husk by a solar photovoltaic-driven system as a replacement for potentially carcinogenic synthetic antioxidants,” Data Br., vol. 28, p. 104933, Feb. 2020, https://doi.org/10.1016/j.dib.2019.104933.
L. Bartolucci, S. Cordiner, and V. Mulone, “FCpowered RBS: Data Analysis And System Optimization,” Energy Procedia, vol. 159, pp. 42–47, Feb. 2019, https://doi.org/10.1016/j.egypro.2018.12.015.
W. Den, C.-H. Chen, and Y.-C. Luo, “Revisiting the water-use efficiency performance for microelectronics manufacturing facilities: Using Taiwan’s Science Parks as a case study,” Water-Energy Nexus, vol. 1, no. 2, pp. 116–133, Dec. 2018, https://doi.org/10.1016/j.wen.2018.12.002.
I. Mahdi, S. Chalah, and B. Nadji, “Reliability study of a system dedicated to renewable energies by using stochastic petri nets: application to photovoltaic (PV) system,” Energy Procedia, vol. 136, pp. 513–520, Oct. 2017, https://doi.org/10.1016/j.egypro.2017.10.276.
